Dulux aquatech exterior pu coat

Product Description

Dulux Aquatech Exterior PU coat is a superior waterproofing technology with hybrid Acrylic-Polyurethane technology and is suitable for both horizontal and vertical wall application. Its thick, elastomeric super protective film covers cracks of upto 4mm and the strong network of reinforced polymers makes the coating extremely tough and dirt & water resistant.

Application Description

Clean the roof and parapet surface thoroughly as explained above. Apply a self-priming coat of Dulux Aquatech PU Coat over the dried surface by diluting with water up to 30% followed by 2-3 coats of Dulux Aquatech PU Coat without dilution using a brush or roller.

Apply the second coat of Dulux Aquatech PU Coat at 90° to the first coat application. Allow the surface to dry for 5-6 hours for each coat application.

Achieving a recommended DFT is very important for water proofing. Therefore, achieve a forced coverage of 8-10 Sqft/litre. If forced coverage is not achieved apply an additional coat of Dulux Aquatech PU Coat.

Health & Safety

– Treatments such as sanding, burning off etc. of paint films may generate hazardous dust and/or fumes.

– Wet sanding should be used whenever possible. Work in well ventilated areas.

–Keep out of reach of children.

–Refer Safety Data Sheet for more details.