Description

Product Description Dulux Weathershield Powerflexx is a high-performance ultra-premium exterior emulsion powered by Triple Defense Technology which provides superior protections against Cracks and Extreme Weather Conditions like heat, dust, and rain which damages the beauty of your house. With the backbone of PU-MA (Polyurethane Modified Acrylic) & Silicon additives the paint film keeps your house protected and beautiful for upto 12 Years. Application Description Step 1 : Surface Preparation Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required. Use Dulux Aquatech Pre Treatment Coat to ensure that algae and fungi are removed from the roots. Step 2 : Application process With Waterproofing : Application of putty is not recommended. Apply one self- priming coat or one coat of Dulux Exterior Acrylic Primer or Dulux Weathershield Alkali Bloc Primer after thinning with water in the ratio of 1:1 by volume or self-prime with Dulux Aquatech Flexible Basecoat (10 Years) / Waterproof Basecoat (6 Years) with 30% dilution. Apply 1 coat of Dulux Aquatech Flexible Basecoat (10 Years) / Waterproof Basecoat (6 Years) without dilution as a waterproofing coat. Apply 2-3 coats of Dulux Weathershield PowerFlexx and allow a drying time of 4-6 hours between the coats. An additional coat should be applied in case of horizontal surfaces. Normal Application : Application of putty is not recommended. Apply one self- priming coat or one coat of Dulux Exterior Acrylic Primer or Dulux Weathershield Alkali Bloc Apply 2-3 coats of Dulux Weathershield Powerflexx over the base coat and allow a drying time of 4-6 hours between the coats. An additional coat should be applied in case of horizontal surfaces like the top of windows, ledges, parapet wall, etc. It is recommended to wash/clean the building every year for the better performance of the coating. Step 3 : Drying time Touch dry for the paint is up to 1 hour and allow 4-6 hours of drying time for recoating